Concrete FAQs — Dirty Boys Concrete Utah
Everything you need to know about concrete installation, pricing, maintenance, and working with Dirty Boys Concrete. Based in Riverton, Utah — serving the entire Wasatch Front since 2009. Can’t find your answer below? Call 801-864-5026 and we’ll get you sorted out.
Pricing & Quotes
How can Dirty Boys Concrete give me an accurate bid over the phone?
With over 50 years of collective crew experience we have streamlined the quoting process. Simply send us a photo of your project area along with basic measurements or square footage and we can provide an accurate price in most cases without an on-site visit. When a project requires a more precise assessment we schedule a brief on-site consultation at no charge. Call 801-864-5026 or visit our Request a Bid page.
How much does a concrete driveway replacement cost in Utah?
A typical concrete driveway replacement in the Salt Lake City and Wasatch Front area costs between $6,000 and $12,000, or approximately $8 to $15 per square foot depending on size, design complexity, and prep work required. Heated driveway systems run an additional $20 to $35 per square foot depending on the heating system and installation complexity. Contact us for a free detailed quote within 24 hours — 801-864-5026.
How much does a stamped concrete patio cost in Utah?
Concrete patio installation in Utah typically ranges from $8 to $20 per square foot. Most new patio installations on prepared ground run $4,500 to $7,500. Projects requiring concrete or sod removal typically add $500 to $1,500, bringing most totals to $5,000 to $9,000. Stamped and colored patios run higher depending on pattern complexity and color selections. Every quote is free and returned within 24 hours.
Do you charge for estimates?
No — estimates are always free. We return detailed quotes within 24 hours on most projects, Monday through Friday. Send us a photo and measurements via our online bid form or call 801-864-5026 and we will get back to you promptly.
Installation & Process
What concrete mix design do you use?
Our absolute minimum for all exterior flatwork is a commercial grade 6-bag 4000 PSI mix, specifically formulated and tested for Utah’s climate and weather conditions, incorporating various superplasticizers and water reducers. Fiber reinforcement is available as an option. This exceeds standard residential specifications and is specifically engineered for Utah’s demanding freeze-thaw environment.
Can you pour concrete in winter?
Yes — concrete can be poured year-round in Utah. We use industry-standard cold weather practices including hot mix water, calcium chloride and non-chloride accelerators, straight-sack cement, and insulated concrete blankets to maintain proper curing temperatures. We have extensive experience with cold weather pours throughout the Wasatch Front.
How long does concrete take to cure?
Concrete reaches full cure strength at 28 days. Foot traffic is safe after 24 hours. Light vehicles and patio furniture after approximately 10 days. Heavy vehicles like pickup trucks and RVs after the full 28-day cure period. All our mix designs are specifically formulated for the time of year to ensure proper cure times and strength.
Do you cap and move sprinklers?
As a courtesy to our customers Dirty Boys Concrete will cap irrigation lines we encounter or that are pointed out by the client during the project. We do not provide a warranty or guarantee for irrigation repairs or damage from broken irrigation lines. We recommend having your irrigation system marked or professionally capped or moved before demolition begins on any project near sprinkler systems.
What is required for concrete truck and pump washout?
All concrete trucks and pumps in Utah are required to have an on-site SWPPP compliant washout location. All washout water must be contained on-site until it evaporates, after which hardened material is disposed of properly. Dirty Boys Concrete has partnered with a service that collects and disposes of washout bins — often at a concrete recycling facility. A small fee is associated with this service and is noted in your project quote.
How do you handle demolished concrete?
We prioritize recycling on every demolition project. Clean concrete is recycled at certified Utah facilities whenever feasible. When recycling is not practical due to contamination or site distance, we use responsible licensed disposal. We never cut corners on disposal to save time or money.
Concrete Care & Maintenance
Will my new concrete crack?
Concrete is a rigid material that naturally expands and contracts with temperature changes — this is normal behavior, not a defect. We install control joints at engineered intervals throughout every slab specifically to direct any natural movement to predetermined locations in a controlled, straight line. These are intentional joints, not cracks. Random surface hairline cracks can occasionally occur due to environmental conditions during curing and are considered within normal industry tolerances. What we design and build against is structural cracking from poor mix design, inadequate subgrade preparation, or improper joint placement — these are preventable, and our commercial grade process is specifically engineered to prevent them.
Can I use salt or deicers on my concrete?
We strongly recommend against using salt or chemical deicers on concrete — especially during the first two years after installation when the concrete is still reaching full hardness and density. Salts and deicers void your warranty. Deicing chemicals accelerate freeze-thaw stress on the surface and can cause scaling and deterioration over time. Sand and kitty litter are safe and effective alternatives for traction in any weather condition. If deicer use is absolutely necessary for safety reasons, having your concrete professionally sealed first provides a protective barrier. We recommend sealing all new concrete after the 28-day cure period regardless of deicer use — proper sealing dramatically extends the service life of any concrete surface in Utah’s climate. Ask us about our professional sealing services.
What is the best concrete sealer for Utah?
The best sealer depends on your concrete finish and goals. For driveways and standard flatwork where maximum protection against water infiltration and freeze-thaw damage is the priority, a penetrating silane-siloxane sealer is the best choice — it bonds permanently within the concrete matrix and provides long-lasting protection. For stamped and decorative concrete where you also want to enhance color and restore surface sheen, a high-quality acrylic sealer is typically the right choice. We carry and apply both types throughout the Wasatch Front. Learn more about our concrete sealing services.
How often should I seal my stamped concrete patio?
Stamped and decorative concrete should be resealed every 1 to 4 years depending on traffic, UV exposure, and sealer quality. Utah’s high-altitude UV intensity is particularly hard on acrylic sealers — properties at higher elevations like Park City and the Cottonwood canyons area may need more frequent resealing than valley properties. Higher-quality sealers can often be refreshed with a maintenance coat rather than a full strip and reseal, which is more economical. We offer professional resealing services throughout the Wasatch Front.
How often should I seal my concrete driveway?
For driveways treated with our premium penetrating silane-siloxane sealer, one application provides long-lasting protection — it bonds permanently with the concrete surface and does not require regular reapplication. For standard acrylic or film-forming sealers, reapplication every 1 to 3 years is recommended depending on traffic and exposure. We always recommend sealing new concrete after the 28-day cure period — it is the single best maintenance investment you can make.
What should I do the first winter after my concrete is installed?
The most important thing is to avoid deicers entirely during the first two winters — the concrete is still reaching full density and is most vulnerable to chemical and freeze-thaw stress during this period. Use sand only for traction. Make sure drainage is working correctly and water is not pooling against or under the slab. If you have a stamped patio or decorative concrete we recommend applying a quality acrylic sealer before the first winter to protect the color and surface.
About Dirty Boys Concrete
Why should I choose Dirty Boys Concrete?
Dirty Boys Concrete brings over 50 years of combined crew experience, a 5-star customer rating, and a commitment to honesty and clear communication on every project. We are named Best of Salt Lake City 2024 and 2025, Best of Riverton 2025 and 2026, Best of State Nominee 2025 and 2026, and hold an A+ rating with the BBB. We are licensed, insured, and UDOT certified for ADA ramp installation. We specialize in residential flatwork including driveways, patios, stamped and decorative concrete, ADA ramps, sports courts, stairs, and RV pads. We attend training courses annually and use a commercial grade 6-bag 4000 PSI mix specifically formulated for Utah’s climate on every project.
What areas do you serve?
We serve 26 cities across the Wasatch Front including Riverton, Salt Lake City, Sandy, Draper, West Jordan, South Jordan, Herriman, Murray, Holladay, Cottonwood Heights, West Valley City, Taylorsville, Millcreek, Midvale, Bluffdale, Magna, South Salt Lake, Sugar House, Daybreak, Saratoga Springs, Lehi, Highland, Alpine, Pleasant Grove, American Fork, Orem, and Park City. View our full service areas page.
Are you licensed and insured?
Yes — Dirty Boys Concrete LLC is fully licensed and insured in Utah. We are BBB A+ accredited and UDOT certified for ADA ramp installation. We have operated continuously in Riverton since 2009.
How do I get started?
Call us at 801-864-5026 Monday through Friday 8am to 5pm, or submit our online Request a Bid form anytime. Send us a photo and basic measurements and we will return a free detailed quote within 24 hours. We look forward to earning your business.





